Gas-dynamic design and development of sketches of the elements of the flow path of the compressor stage TK-2 of the turbo-expander unit of the air turborefrigeration unit VTHU-2-20-01
Gas-dynamic design and development of sketches of the elements of the flow path of the compressor stage TK-2 of the turbo-expander unit of the air turborefrigeration unit VTHU-2-20-01
Похожие работы
Loading
Gas dynamic design of a centrifugal steam gas compressor
Preliminary calculation of the centrifugal blower with an assessment of the possibility of execution
Generalization of the main parameters of gas-dynamic characteristics of centrifugal natural gas compressors for gas pumping units of booster compressor stations in order to develop recommendations for predicting the type of gas-dynamic characteristics
Development of a technical solution configuration for increasing flare gas pressure
Preliminary calculation of a centrifugal blower
Development of a method for calculating compressed air generation systems at the Severnoye electric depot of the State Unitary Enterprise «Petersburg Metropolitan»
Determination of design characteristics and development of sketches and models of elements of the flow path of the compressor stage of the turbo-expander unit TDA-486/11.8
Determination of layouts and main characteristics of centrifugal boil-off gas compressors
Determination of the layout and main characteristics of the centrifugal exhaust gas blower
Gas-dynamic design and development of sketches and models of elements of the flow path of the compressor stage of the turbo-expander unit TDA-182.2/11.6
Gas-dynamic design and development of sketches of the elements of the flow path of the turbocompressor TK-1 of the air turborefrigeration unit VTHU-2-20-01
Engineering of utilization and disposal of carbon dioxide
Development of a mathematical model of the working air supply system for the installation for testing CC compartments
Calculation and design of an explosion-proof air conditioner (mine)
Determination of design characteristics and development of sketches of the elements of the flow path of the booster-compressor of the turboexpander unit TDA-36.5 / 6.0
Hydrodynamic modeling of heat exchange processes of heat exchangers as applied to large-scale LNG plants
The operation modes simulator of oil and gas facilities
Normative documentation and software development for compressors selection in the compressor stations design
Existing systems complex survey conducting of air supply and distribution for technical needs at the metro sites
Natural gas centrifugal compressors design
Air-collecting receiver gas-dynamic flow and three-dimensional computer modeling study with passage geometrical dimensions determination
Single-stage centrifugal compressor passage design with an axial impeller for GPA with a capacity of 32 MW
Axial compressors elementary blade system efficiency computational studies using experimental data on the diffusivity factor influence
Comparative analysis of the HRC 2,2 with VLD and VD GPA-16 DKS «Ural» aggregates characteristics of Yamburg gas condensate field
GPA axial compressors gas dynamic and design parameters efficiency research and analysis in order to determine the rational scope of application
Special design fan for aggressive gases
Flow simulation around the aerodrome jet deflecting shield
16 MW natural gas supercharger outlet chamber optimization
General industrial centrifugal compressor preliminary scheme development
